Cooper & Hunter EVIPOWER CH-HP84UMNM Heat Pump

The Cooper & Hunter EVIPOWER CH-HP84UMNM is a powerful commercial air-to-water heat pump designed for heating, cooling and domestic hot water (DHW) production in large residential, commercial and industrial installations. With a nominal 84 kW heating capacity and 59 kW cooling capacity, the unit provides a high-output solution for demanding HVAC systems.

The manufacturer specifies five operating modes: Heating, Cooling, DHW, Heating + DHW, and Cooling + DHW. Copeland scroll compressors with EVI (Enhanced Vapour Injection) technology allow the system to maintain heating operation at outdoor temperatures down to –30°C, while cooling operation is supported at temperatures up to +45°C.

Key Features

• 84 kW commercial heating performance – designed for large-capacity heating systems.
• Five operating modes – provides heating, cooling and domestic hot water individually or in combined modes.
• EVI technology – Copeland scroll compressors with Enhanced Vapour Injection improve performance under demanding low-temperature conditions.
• Operation down to –30°C – suitable for heating systems in cold climates.
• Maximum water temperature up to 60°C – supports a wide variety of hydronic heating and DHW applications.
• Patented heat exchanger – according to Cooper & Hunter, it can remain protected against freezing for up to 20 hours without electrical power at an ambient temperature of –20°C.
• Smart Defrost – optimises defrost cycles to maintain reliable heating performance.
• 4G MMN management – designed for professional monitoring and system management.
• Quiet mode – provides additional operating flexibility where reduced noise is required.
• Colour touchscreen controller – simplifies configuration and day-to-day system control.

Applications

The CH-HP84UMNM is particularly suitable for commercial buildings, hotels, offices, apartment complexes, production facilities and other large hydronic HVAC installations. It can be integrated into appropriately engineered systems for space heating, cooling and hot-water production.

Important Installation Information– The CH-HP84UMNM does not have a factory-installed circulation pump. An appropriately sized external circulation pump must therefore be included when designing and installing the hydraulic system. The unit uses R410A refrigerant. This is worth highlighting because some newer Cooper & Hunter products use R32, but current manufacturer information specifically lists R410A for the CH-HP84UMNM. Overall, the Cooper & Hunter EVIPOWER CH-HP84UMNM is a high-capacity solution for projects requiring powerful heating and cooling, reliable low-temperature operation and flexible hot-water integration in one commercial air-to-water system.